Design & Simulation

CoilLab

Fins & tube chilled water, hot water, steam, DX evaporator & condenser coil design software

CoilLab is heat exchanger coil design software that designs and simulates fins & tube coils for chilled water, heating, steam, DX evaporator, condenser and evaporative condenser applications, with more than 210 refrigerants including low-GWP refrigerants, and a wide range of glycols and brines. It provides accurate psychrometric analysis, inline, staggered, single and interlaced circuiting, smooth, enhanced and inner grooved tubes, and virtual circuiting drawings for easy assembly. CoilLab complies with AHRI 410, and many clients have obtained AHRI and Eurovent certification with it. It produces manufacturing drawings in CAD or DXF with exact bill of materials, ready for CAD/CAM.

Check out the CoilLab software

CoilLab 3D coil model

CoilLab

Coil design in the browser—sizing, 3D, and DXF export. No install.

Calculate → Report → Design → Manufacture

Try CoilLab now

What you can do

  • Evaporator coil and condenser coil design, plus chilled water, hot water, steam and evaporative condenser coils
  • 210+ refrigerants including low-GWP, plus water and a wide range of brines and glycols
  • Full freedom of coil geometry, tube types and circuiting
  • Visual circuiting drawings that guide technicians during assembly
  • Psychrometric chart showing the complete air process
  • Distributor selection for evaporator coils
  • Condensers rated for ambient up to 55°C. Low-temperature applications down to −80 °C are also supported.
  • Complies with AHRI 410 – used by customers for AHRI and Eurovent (FCU) certification
  • Used by 65+ clients in 25 countries
  • Coil manufacturing drawings in CAD or DXF with exact bill of materials, ready for CAD/CAM

See CoilLab on your own project

Sunday – Thursday, 9 AM – 5 PM (GMT+3) · +962 7 9973 3254