Design & Simulation

Microchannel Heat Exchanger Design Software

Microchannel condenser, evaporator & water coil design software

Applied MCHE is microchannel heat exchanger design software for chilled water, heating, DX evaporator and condenser applications, with more than 210 refrigerants and a wide range of glycols and brines. Designers define hole type and size (rectangular or circular), legs, tube width and fin type, length, thickness and material. It complies with AHRI 410, AHRI 210/240 and ASHRAE 15, works up to 55°C ambient for condensers, and calculates headers and evaporator distributors. Low temperature applications down to −80 °C are also supported. Manufacturing drawings with exact bill of materials are produced in CAD or DXF.

What you can do

  • Microchannel condenser, DX evaporator, chilled water and heating coil design
  • 210+ refrigerants including low-GWP, plus water and a wide range of brines and glycols
  • Flexible microchannel geometry – tube, port and fin configurations
  • Header and distributor sizing
  • Psychrometric chart showing the complete air process
  • Condensers rated for ambient up to 55°C. Low-temperature applications down to −80 °C are also supported.
  • Complies with AHRI 410, AHRI 210/240 and ASHRAE 15
  • Manufacturing drawings in CAD or DXF with exact bill of materials

See Microchannel Heat Exchangers on your own project

Sunday – Thursday, 9 AM – 5 PM (GMT+3) · +962 7 9973 3254