30余年暖通空调工程经验——从负荷计算到G代码

暖通空调设备的完整设计与制造专有技术

暖通空调工程师,合计工程经验超过30年。从负荷计算和部件选型,到FEM结构分析与CFD气流仿真,再到协同BIM模型、物料清单、CAD/CAM文件和可直接上机的G代码,以及用来制造这一切的生产线。一个工程团队,覆盖机组的每个阶段。

30+年合计
工程经验

一支拥有三十年机组设计经验的暖通空调工程师团队,在真实项目和工厂现场解决问题——这是我们交付的每一次计算、仿真和生产线背后的经验。

步骤

  1. 01 负荷
    负荷计算
  2. 02 选型
    部件选型
  3. 03 设计
    三维机组设计
  4. 04 FEM/CFD
    仿真
  5. 05 BIM/BOM
    协调与工程量
  6. 06 G代码
    制造文件
  7. 07 工厂
    生产线

01 — 设备设计

从零开始的暖通空调设备设计

我们不只是从样本里选一台机组——我们设计机组本身:制冷回路、结构、气流,以及冷水机组、空气处理机组、盘管、风机盘管和VRF系统的制造文件。

01 · PACKAGE UNITS

Rooftop & Package Units

Complete packaged units - compressor selection and circuit balancing through to a weatherproof casing, insulation and air distribution.

  • Circuit balancing
  • Fans & compressors
  • Casing & insulation
02 · CHILLERS

Air & Water-Cooled Chillers

Evaporator and condenser selection, circuit arrangement, expansion devices, base frame and connection piping.

  • Heat exchangers
  • Circuiting
  • Base frame
03 · CU

Condensing Units

Condensing units and their accessories, with capacity matched between the condensing and evaporating sides and built for easy installation and service.

  • Capacity matching
  • Structure
  • Serviceability
04 · AHU

Air Handling Units

Full AHU section design - filters, coils, fans, heat recovery and dampers - with pressure-drop and acoustic calculations and submittals.

  • Sections
  • Pressure drop
  • Heat recovery
05 · COILS

Heat Transfer Coils

Evaporator, condenser, chilled-water, heating and steam coils - rows, fin density, circuiting, and air and water velocities.

  • Rows & fins
  • Circuiting
  • Velocities
06 · FCU

Fan Coil Units

Ducted, concealed, cassette and floor-standing FCUs - 2-pipe and 4-pipe coils, EC or AC fan motors, drain pans, filters and compact sheet metal casings sized for ceiling voids.

  • 2/4-pipe coils
  • Fan & motor
  • Low-profile casing
07 · VRV / VRF

VRV / VRF Systems

Variable refrigerant flow system design - outdoor and indoor unit selection, refrigerant piping layout, branch joints and line sizing, length and height-difference limits, and heat-recovery configurations.

  • Unit selection
  • Refnet & line sizing
  • Heat recovery
08 · HVAC COMPONENTS

All Other Components

Fans, dampers, grilles and diffusers, plate and heat-pipe heat exchangers, and vibration isolation bases.

  • Fans
  • Dampers
  • Heat exchangers
  • Isolation

由我们自有的设计软件支撑

02 — 管道与钣金

暖通管道与钣金风管

水系统和制冷剂管网,以及符合SMACNA的钣金:管径计算、轴测图、机组外壳和可直接下料的展开图。

管道

管网

冷冻水与热水、制冷剂管路和冷凝水排放。

  • 管径、压降与水泵选型
  • 热膨胀、支架与固定点
  • 水力平衡与阀门选型
  • 可直接下车间的轴测图

钣金

钣金与风管

从风管网络设计到切割台上的展开件。

  • 等摩阻法风管计算
  • 按SMACNA确定板厚、连接与加固
  • 机组钣金外壳与围护
  • 含折弯补偿的展开图

03 — FEM 与 CFD

暖通设备的FEM与CFD分析

有限元分析(FEM)和计算流体力学(CFD)在第一张板材下料前验证结构、振动和气流——不只是彩色云图。

FEM有限元分析
  • 框架与底座的应力和变形
  • 风机与压缩机的模态和振动分析
  • 内压作用下的钣金面板
  • 吊装、运输和安装点校核
CFD计算流体力学
  • 盘管和过滤器上的气流均匀性
  • 人员区的热舒适与空气流动
  • 数据中心与冷热通道封闭
  • 室外机组周围的冷凝器空气再循环

04 — BIM 与 BOM

暖通工程的BIM与BOM

一套协同模型,同时出图和算量

面向暖通空调项目的建筑信息模型(BIM)和物料清单(BOM):LOD 400的机电协调、碰撞检查、施工图,以及用于报价和现场跟踪的工程量。

BIM 建筑信息模型(BIM)

协同到LOD 400的机电模型,与结构和建筑模型的碰撞检查,以及直接从模型生成的施工图。

BOM 物料清单(BOM)

设备、管道、风管、保温和附件的工程量取自同一模型——可直接用于报价、招标和现场跟踪。

05 — CAD / CAM / G代码

暖通制造的CAD、CAM与G代码

从屏幕直接到数控机床

我们交付暖通制造CAD、CAM排料和数控G代码——不只是概念图。车间拿到展开并排好的钣金零件;机床拿到与您设备匹配的等离子、激光、冲孔和折弯程序。

  1. 01
    三维CAD模型

    零件和装配按最终制造尺寸建模。

  2. 02
    展开与折弯补偿

    按每种板厚和材料设定K因子和折弯半径。

  3. 03
    排料

    零件排布在标准板材上,尽量减少废料。

  4. 04
    数控机床G代码

    等离子和激光切割、冲孔与折弯——与您的机床匹配。

  5. 05
    车间图与下料清单

    每台机组的装配图、焊接图和物料清单。

暖通钣金G代码示意——数控等离子/激光切割路径(CAD → CAM → G代码)

精选作品——真实图纸

暖通工程图与车间实例

近期机组和部件的生产图——送往车间的同一套文件:装配图、带零件表的爆炸图,以及完整标注的零件图。

Package unit assembly drawing AS5035 showing plan, side and front views with dimensions

PACKAGE UNIT - AS5035

Package Unit General Assembly

Plan, side and front views of a 1490 - 1435 - 1178 mm packaged unit - compressor, condenser coil, blower section and 25 mm fibreglass-insulated casing, drawn at 1:30 with the shop routing (cut, CNC, bend, weld, paint, assembly).

Exploded view of a unit casing with numbered balloons and a 25-item parts list

CHILLER - EXPLODED VIEW

Exploded Assembly with Bill of Materials

Base frame, side posts, panels, top deck with fan opening and a 4-row coil - 25 numbered items with part numbers, quantities and ISO fasteners, ready for purchasing and assembly.

Finned-tube coil drawing with top, side, front and isometric views, 1000 by 578 by 96 mm

COIL - 1000 - 578 - 96 mm

Finned-Tube Heat Transfer Coil

Copper tube, aluminium fin coil in a sheet metal casing - tube layout, return bends, headers and connections, fully dimensioned for the coil line.

Brazed plate heat exchanger with mounting bracket in orthographic and isometric views

BPHE - HEAT EXCHANGER

Brazed Plate Heat Exchanger & Bracket

BPHE integration with a formed sheet metal mounting bracket - port positions, fixing holes and clearances checked in 3D before release.

3D model of a compact air handling unit with hinged access doors and internal sections

AHU - COMPACT

Compact Air Handling Unit

Full 3D model of a compact AHU at 1:15 - insulated panel casing on a framing profile, hinged access doors with latches, and internal sections laid out for filters, heat recovery and coils, ready for panel unfolding and the bill of materials.

业绩——已开发的产品线

面向制造商的暖通产品线开发

从部件选型到三维建模、物料清单、钣金零件图和结构校核——为暖通空调制造商完成整条产品族,许多机型适用于高达55 °C的环境温度。也支持低至−80 °C的低温应用。

IBV

2 product lines
Air-Cooled Rooftop Package - 20 RT

From component selection to full 3D build with bill of materials; every sheet part drawn in top, side and front views, with deflection analysis of the main parts.

Air-Cooled Chiller Heat Pump - 4 - 30 RT

Scroll compressor range.

Remak

1 product line - 20 models
High-Efficiency AHU Range - 20 Models

Cross-plate heat exchanger, EC supply and return fans, coils, filters and dampers.

HACE

5 product lines
Air-Cooled Scroll Chiller - 4 - 420 kW

Operating up to 55 °C ambient.

Air-Cooled Screw Chiller - 100 - 1,500 kW

Operating up to 55 °C ambient.

Water-Cooled Screw Chiller - 300 - 2,000 kW
Air-Cooled Scroll Package - 4 - 500 kW

Operating up to 55 °C ambient.

Scroll Condensing Unit - 4 - 200 kW

Warth

5 product lines
Air-Cooled Scroll Chiller - 4 - 450 kW

Operating up to 55 °C ambient.

Air-Cooled Screw Chiller - 80 - 1,600 kW

Operating up to 55 °C ambient.

Water-Cooled Screw Chiller - 100 - 2,200 kW
Air-Cooled Scroll Package - 4 - 300 kW

Operating up to 55 °C ambient.

Scroll Condensing Unit - 4 - 250 kW

ASTIAC

2 product lines
Air-Cooled Scroll Chiller - 4 - 420 kW

Operating up to 50 °C ambient, with variable-speed fan drive and an acoustic compressor compartment for lower sound.

Air-Cooled Screw Chiller - 100 - 1,500 kW

Operating up to 50 °C ambient, with variable-speed fan drive and an acoustic compressor compartment for lower sound.

GTB

2 product lines
Swimming-Pool Condensing Unit with Desuperheater - 20 - 100 kW

Heats pool water up to 60 °C at ambient temperatures down to –25 °C.

Condensing Unit with Decorative Glass-Front Indoor Unit

Tiba

1 product line
Air-Cooled Scroll Chiller - 75 - 450 kW

Operating up to 50 °C ambient.

06 — 暖通空调工厂筹建

暖通空调工厂筹建与生产线

我们帮助制造商新建或升级工厂——从产品范围和产能规划,到线体布局、设备规格、工艺诀窍和调试投产——使设计的机组能够稳定地规模化制造。

盘管线

盘管制造

翅片冲压与模具、发卡弯管、胀管、回弯、钎焊和盘管检漏。

钣金线

外壳与框架

数控冲孔和激光切割、折弯机、型材辊压、焊接和粉末喷涂。

面板线

空气处理机组夹芯板

双层保温板、框架型材、断热转角和门段。

风管线

风管生产

自动矩形风管线、螺旋风管成型、咬口和法兰设备、管件。

装配线

机组装配

组合式机组、冷水机组、冷凝机组、风机盘管和空气处理机组的工位布局,以及物流和节拍规划。

制冷

充注与检漏

钎焊工位、压力和检漏试验、抽真空和制冷剂充注工位。

测试

运行测试与质控

线末运行测试工位、性能试验室和质量控制点。

管道车间

管道预制

制冷剂和水管道组件的切割、弯曲和集管制造。

工厂筹建项目包含什么

01产品范围与产能规划
02厂区布局与物流
03设备规格与供应商评估
04工装、模具、夹具和胎具
05工艺卡、作业指导书和质控计划
06调试、首件试制和人员培训

07 — 我们如何工作

暖通空调工程方法

1
理解任务书

应用、气候条件、空间限制和预算。

2
负荷与选型

热负荷计算和主要部件选型。

3
详细设计

机组、管道和风管的三维模型。

4
仿真

FEM和CFD分析,并根据结果修改设计。

5
协调与工程量

协同BIM模型和物料清单。

6
制造与支持

CAM文件、G代码和车间现场支持。

我们遵循的工程标准

ASHRAEAHRISMACNAASMEISO当地规范

在规划新机组、项目或生产线

让合计经验超过30年的暖通空调工程师来做。把图纸或规格发给我们,我们会回复工程思路和明确的工作范围。

周日到周四,上午9点 – 下午5点(GMT+3)
约旦安曼贾巴尔·侯赛因,哈立德·本·瓦利德街,198号楼3层302室
© 2026 Applied Engineering Solutions — 合计30余年工程经验。保留所有权利。
暖通空调 — FEM — CFD — BIM — BOM — CAD/CAM — 工厂筹建