Design & Simulation
Swimming Pool Unit design software
Pool dehumidifier, pool AHU, heat pump & desiccant unit design software
Applied Swimming Pool Units is pool dehumidifier design software that designs and simulates indoor pool dehumidification units for both summer and winter operation, according to Eurovent (EN 1886, EN 13053, EN 308) and AHRI (1350/1351, 430/431, 410, 1060/1061) standards, with support for Eurovent and AHRI certification. It covers dedicated pool dehumidification units, pool AHUs with dehumidification, heat-pump pool units, fresh-air and exhaust units, and desiccant dehumidification units. Each unit is built from filters, coils (chilled water, hot water, steam and DX with more than 210 refrigerants including low-GWP refrigerants), centrifugal or plug fans, heat recovery, heat pipes, economizer and electric heater sections, with psychrometric analysis, bill of materials, unit weight and full costing.
Standard sections
- Filtration: pre-filter, bag filter, HEPA filter and electrostatic filter
- Coils: DX, chilled water, heating and steam coil, plus bypass with coil
- Fan section, full inlet damper and economizer mixing box
- Heat recovery: thermal wheel, cross-plate and counter-cross-plate heat exchangers
- Electric heater and eliminator
- Fresh air louver, fresh air intake and sand trap louver
- Supply, return and exhaust plenums, sound attenuator, access section and empty section
Optional sections & features
- Air-cooled and water-cooled condensing units
- Hot gas reheat
- Desiccant dehumidifier thermal wheel
- Duct furnace section
- Heat-pipe heat recovery and horseshoe heat pipe
- Wall fans
Supported component brands
Fan
Nicotra Gebhardt, Comefri, Kruger, Yilida, Ziehl-Abegg, Deton, Rosenberg and ebm-papst
Motors
Leroy Somer, Siemens, Teco and Watt
Plate heat exchangers
HeaEx, Klingenberg, Hoval and Recuperator
Heat pipes
Applied HeatPipeLab and SPC
Energy wheels
HeaEx, Klingenberg, Hoval, DRI, Semco and Recuperator
More brands can be added on request
What you can do
- Eurovent standards: EN 1886, EN 13053 and EN 308
- AHRI standards: 1350/1351, 430/431, 410 and 1060/1061
- Supports Eurovent and AHRI certification
- Dedicated swimming pool dehumidifiers
- Swimming pool AHUs with dehumidification, with integrated refrigeration or connected to external equipment
- Heat-pump pool units that reuse recovered heat for air or pool-water heating
- Fresh-air and exhaust pool units, with heat recovery
- Desiccant dehumidification units
- Pool dehumidification calculation for both summer and winter operation
- Coils: chilled water, hot water, steam and DX
- DX coils with 21 refrigerants: R454B, R32, R410A, R407C, R22, R134a, R404A, R507A, R1234ze, R1234yf, R407A, R407F, R449A, R448A, R450A, R513A, R452A, R515B, R744, R1270 and R290
- Chilled-water coils with water, ethylene and propylene glycol, sodium and calcium chloride brines and methanol
- Steam coils at saturation or superheat
- Psychrometric analysis of the air process
- Centrifugal or plug fans from Nicotra Gebhardt, Comefri, Kruger, Yilida, Ziehl-Abegg, Deton, Rosenberg and ebm-papst – other brands on request
- Heat recovery: thermal wheels and plate heat exchangers
- Heat pipes: horseshoe and heat-recovery types
- Economizer and electric heater
- Condensers rated for ambient up to 55°C. Low-temperature applications down to −80 °C are also supported.
- Insulation: injected foam, fiberglass, rock wool or polyurethane, at different densities
- Panel thickness: 25, 30, 42, 50 or 60 mm
- Casing: galvanized or stainless steel, 0.5 to 1.5 mm
- Profiles: aluminum, mild steel, galvanized steel, PVC or thermal break
- Horizontal or vertical units, single or double deck – sections can be combined horizontally and vertically
- Detailed bill of materials with prices
- Unit costing from raw-material and component costs, with the final price at your margin
- Editable prices in any currency
- Unit weight calculation
- SI, Imperial or mixed units
- Coil design mode, in addition to simulation
- Coil AutoCAD drawing with circuiting, plus coil manufacturing drawings
- Panel design with AutoCAD, DXF and PDF drawings
- Whole-unit AutoCAD drawing and manufacturing drawings for outer and internal parts
- BIM drawings
- Custom technical submittal and quotation reports in your own format
- Multi-language
See Swimming pool design software on your own project
Sunday – Thursday, 9 AM – 5 PM (GMT+3) · +962 7 9973 3254